Basics of CNC Programming
āĻā§āĻĒā§āĻ¤ā§ ā§¨ā§Ļā§¨ā§¨ ¡ CRC Press
ā§Š.ā§Šstar
ā§Š āĻāĻž āĻĒā§°ā§āĻ¯āĻžāĻ˛ā§āĻāĻ¨āĻžreport
āĻāĻŦā§āĻ
484
āĻĒā§āĻˇā§āĻ āĻž
family_home
āĻ¯ā§āĻā§āĻ¯
info
reportāĻŽā§āĻ˛ā§āĻ¯āĻžāĻāĻāĻ¨ āĻā§°ā§ āĻĒā§°ā§āĻ¯āĻžāĻ˛ā§āĻāĻ¨āĻž āĻ¸āĻ¤ā§āĻ¯āĻžāĻĒāĻ¨ āĻā§°āĻž āĻšā§ā§ąāĻž āĻ¨āĻžāĻ āĻ
āĻ§āĻŋāĻ āĻāĻžāĻ¨āĻ
āĻāĻ āĻāĻŦā§āĻāĻāĻ¨ā§° āĻŦāĻŋāĻˇā§ā§
Before the introduction of automatic machines and automation, industrial manufacturing of machines and their parts for the key industries were made though manually operated machines. Due to this, manufacturers could not make complex profiles or shapes with high accuracy. As a result, the production rate tended to be slow, production costs were very high, rejection rates were high and manufacturers often could not complete tasks on time.Industry was boosted by the introduction of the semi-automatic manufacturing machine, known as the NC machine, which was introduced in the 1950âs at the Massachusetts Institute of Technology in the USA. After these NC machine started to be used, typical profiles and complex shapes could get produced more readily, which in turn lead to an improved production rate with higher accuracy.Thereafter, in the 1970âs, an even larger revolutionary change was introduced to manufacturing, namely the use of the CNC machine (Computer Numerical Control). Since then, CNC has become the dominant production method in most manufacturing industries, including automotive, aviation, defence, oil and gas, medical, electronics industry, and the optical industry. Basics of CNC Programming describes how to design CNC programs, and what cutting parameters are required to make a good manufacturing program. The authors explain about cutting parameters in CNC machines, such as cutting feed, depth of cut, rpm, cutting speed etc., and they also explain the G codes and M codes which are common to CNC. The skill-set of CNC program writing is covered, as well as how to cut material during different operations like straight turning, step turning, taper turning, drilling, chamfering, radius profile, profile turning etc. In so doing, the authors cover the level of CNC programming from basic to industrial format. Drawings and CNC programs to practice on are also included for the reader.
āĻŽā§āĻ˛ā§āĻ¯āĻžāĻāĻāĻ¨ āĻā§°ā§ āĻĒā§°ā§āĻ¯āĻžāĻ˛ā§āĻāĻ¨āĻžāĻ¸āĻŽā§āĻš
ā§Š.ā§Š
ā§Š āĻāĻž āĻĒā§°ā§āĻ¯āĻžāĻ˛ā§āĻāĻ¨āĻž
āĻ˛āĻŋāĻāĻā§° āĻŦāĻŋāĻˇāĻ¯āĻŧā§
Pawan Negi, Mangey Ram, Om Prakash Yadav
āĻāĻ āĻāĻŦā§āĻāĻāĻ¨āĻ āĻŽā§āĻ˛ā§āĻ¯āĻžāĻāĻāĻ¨ āĻā§°āĻ
āĻāĻŽāĻžāĻ āĻāĻĒā§āĻ¨āĻžā§° āĻŽāĻ¤āĻžāĻŽāĻ¤ āĻāĻ¨āĻžāĻāĻāĨ¤
āĻĒāĻĸāĻŧāĻžā§° āĻ¨āĻŋāĻ°ā§āĻĻā§āĻļāĻžā§ąāĻ˛ā§
āĻ¸ā§āĻŽāĻžā§°ā§āĻāĻĢâāĻ¨ āĻā§°ā§ āĻā§āĻŦāĻ˛ā§āĻ
Android āĻā§°ā§ iPad/iPhoneā§° āĻŦāĻžāĻŦā§ Google Play Books āĻāĻĒāĻā§ āĻāĻ¨āĻˇā§āĻāĻ˛ āĻā§°āĻāĨ¤ āĻ āĻ¸ā§āĻŦāĻ¯āĻŧāĻāĻā§āĻ°āĻŋāĻ¯āĻŧāĻāĻžā§ąā§ āĻāĻĒā§āĻ¨āĻžā§° āĻāĻāĻžāĻāĻŖā§āĻā§° āĻ¸ā§āĻ¤ā§ āĻāĻŋāĻāĻ āĻšāĻ¯āĻŧ āĻā§°ā§ āĻāĻĒā§āĻ¨āĻŋ āĻ¯'āĻ¤ā§ āĻ¨āĻžāĻĨāĻžāĻāĻ āĻ¤'āĻ¤ā§āĻ āĻā§āĻ¨ā§ āĻ
āĻĄāĻŋāĻ
'āĻŦā§āĻ āĻ
āĻ¨āĻ˛āĻžāĻāĻ¨ āĻŦāĻž āĻ
āĻĢāĻ˛āĻžāĻāĻ¨āĻ¤ āĻļā§āĻ¨āĻŋāĻŦāĻ˛ā§ āĻ¸ā§āĻŦāĻŋāĻ§āĻž āĻĻāĻŋāĻ¯āĻŧā§āĨ¤
āĻ˛ā§āĻĒāĻāĻĒ āĻā§°ā§ āĻāĻŽā§āĻĒāĻŋāĻāĻāĻžā§°
āĻāĻĒā§āĻ¨āĻŋ āĻāĻŽā§āĻĒāĻŋāĻāĻāĻžā§°ā§° ā§ąā§āĻŦ āĻŦā§āĻ°āĻžāĻāĻāĻžā§° āĻŦā§āĻ¯ā§ąāĻšāĻžā§° āĻā§°āĻŋ Google PlayāĻ¤ āĻāĻŋāĻ¨āĻž āĻ
āĻĄāĻŋāĻ
'āĻŦā§āĻāĻ¸āĻŽā§āĻš āĻļā§āĻ¨āĻŋāĻŦ āĻĒāĻžā§°ā§āĨ¤
āĻ-ā§°ā§āĻĄāĻžā§° āĻā§°ā§ āĻ
āĻ¨ā§āĻ¯ āĻĄāĻŋāĻāĻžāĻāĻ
Kobo eReadersā§° āĻĻā§°ā§ āĻ-āĻāĻŋā§āĻžāĻāĻšā§ā§° āĻĄāĻŋāĻāĻžāĻāĻāĻ¸āĻŽā§āĻšāĻ¤ āĻĒā§āĻŋāĻŦāĻ˛ā§, āĻāĻĒā§āĻ¨āĻŋ āĻāĻāĻž āĻĢāĻžāĻāĻ˛ āĻĄāĻžāĻāĻ¨āĻ˛âāĻĄ āĻā§°āĻŋ āĻ¸ā§āĻāĻā§ āĻāĻĒā§āĻ¨āĻžā§° āĻĄāĻŋāĻāĻžāĻāĻāĻ˛ā§ āĻ¸ā§āĻĨāĻžāĻ¨āĻžāĻ¨ā§āĻ¤ā§°āĻŖ āĻā§°āĻŋāĻŦ āĻ˛āĻžāĻāĻŋāĻŦāĨ¤ āĻ¸āĻŽā§°ā§āĻĨāĻŋāĻ¤ āĻ-ā§°āĻŋāĻĄāĻžā§°āĻ˛ā§ āĻĢāĻžāĻāĻ˛āĻā§ āĻā§āĻ¨ā§āĻā§ āĻ¸ā§āĻĨāĻžāĻ¨āĻžāĻ¨ā§āĻ¤ā§° āĻā§°āĻŋāĻŦ āĻāĻžāĻ¨āĻŋāĻŦāĻ˛ā§ āĻ¸āĻšāĻžāĻ¯āĻŧ āĻā§āĻ¨ā§āĻĻā§ā§°āĻ¤ āĻĨāĻāĻž āĻ¸āĻŦāĻŋāĻļā§āĻˇ āĻ¨āĻŋā§°ā§āĻĻā§āĻļāĻžā§ąāĻ˛ā§ āĻāĻžāĻāĻāĨ¤
